Card found: 42455354
Registered to: NokiaUsers

Connect phone on selected interface...

UFS S/N 70244 Boot - OK

Connect phone on selected interface...

Phone found!
Series 40 Device detected! 
read info...  - OK

Resetting selected items...
Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Test mode set
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!

Elapsed: 00:00:12

Card found: 42455354
Registered to: NokiaUsers

Connect phone on selected interface...

UFS S/N 70244 Boot - OK

Connect phone on selected interface...

Phone found!
Series 40 Device detected! 
read info...  - OK

Read and Check phone data...
Infineon checking...

SIMLOCK TEST : OK
RUN TEST     : OK

Booting phone now....
Sync OK , A2
CPU ID : XGOLD , A200341100
PBL : Dynamic
Boot OK , 01AB
SBL : Dynamic
Algo OK , 01
SBL mode OK
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
FLASH ID : 00EF000000176000
FLASH ID : UNKNOW [Not In Base]
Boot Done!


Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected! 
read info...  - OK

Read and Check phone data...
Infineon checking...

SIMLOCK TEST : OK
RUN TEST     : OK

Booting phone now....
Sync OK , A2
CPU ID : XGOLD , A200341100
PBL : Dynamic
Boot OK , 01AB
SBL : Dynamic
Algo OK , 01
SBL mode OK
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
FLASH ID : 00EF000000176000
FLASH ID : UNKNOW [Not In Base]
Boot Done!


Done!

Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm908_002.700
PPM : rm908_002.70ia
CNT : rm9080_nai02.70ia

Infineon flashing...
Booting phone now....
Sync OK , A2
CPU ID : XGOLD , A200341100
PBL : Dynamic
Boot OK , 01AB
SBL : Dynamic
Algo OK , 01
SBL mode OK
SBL : Default_RAM_Bootloader
EPP CFG [Bering]...
FLASH ID : 00EF000000176000
FLASH ID : UNKNOW [Not In Base]
Boot Done!

   ===Flashing [MCU]===
File : rm908_002.700
Image : hw_f31_rm908_62_mcusw_02.70_Best.fls
Cert block found, sending....
Cert sent
Found 3 region(s)
Processing Region 1/3
Erase , Start : 0x00800000 , Len : 0x00210000
Erasing, wait ... 
Erase done
Write , Start : 0x00800000 , Len : 0x00210000
Flashing , wait ...
Region flash done
Processing Region 2/3
Erase , Start : 0x00C60000 , Len : 0x00250000
Erasing, wait ... 
Erase done
Write , Start : 0x00C60000 , Len : 0x00221240
Flashing , wait ...
Region flash done
Processing Region 3/3
Erase , Start : 0x00FFC000 , Len : 0x00004000
Erasing, wait ... 
Erase done
Write , Start : 0x00FFC000 , Len : 0x00000040
Flashing , wait ...
Region flash done
Check : A59F
   ===Flashing [PPM]===
File : rm908_002.70ia
Image : hw_f31_rm908_62_ppm_02.70ia_Best.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00210000 , Len : 0x00250000
Erasing, wait ... 
Erase done
Write , Start : 0x00210000 , Len : 0x001C5A00
Flashing , wait ...
Region flash done
Check : 5C3D
   ===Flashing [CNT]===
File : rm9080_nai02.70ia
Image : hw_f31_rm908_62_image_02.70ia_Best.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x00EB0000 , Len : 0x000D0000
Erasing, wait ... 
Erase done
Write , Start : 0x00EB0000 , Len : 0x000661C0
Flashing , wait ...
Region flash done
Check : 6F7E

Flashing done, rebooting...
-> Infineon info : Do FullFactory Sets after flashing
Flashing Done!


Init Service mode... Wait...

Afterflash settings...
SW ver : V 02.70
22-02-13
RM-908
(c) Nokia
IMEI   : 358618062080319
PCode  : 059V8B5
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
All done!

Connect phone on selected interface...

Connect phone on selected interface...

