Card found: 42455354
Registered to: NokiaUsers

Connect phone on selected interface...

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : Verify Error :(
Try again...
->  Error answer from BootRom

Boot error #1, break :(

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : Cold Flash
Check FlashFiles, Please, wait...

Files Set for Flashing :
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : XGOLD 213
2nd boot OK, 01
2nd ready, AA
Sending Algo
Algo sent OK
BL : Quantum_Bootloader_2.3_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!
Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI   : 357008043381971
PCcode : 059G4F5

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\Users\AHMED\Desktop\Nokia Infinity Best v2.29 by NRSolution\Backup\Cert\357008043381971_XG213_CRT.rpl


Flashing done!
Total flash time : 00:00:00
Reboot phone now...

Reading Phone Info....
Connected phone -   C1-02
Software Info:     V 06.15 25-11-11 RM-643 (c) Nokia            
IMEI:  357008043381971
PPM version :   V 06.15 25-11-11 RM-643 (c) Nokia             M_C
Product code:  059C8L2
Checking...
SimLock status : SimLock is OK
Security status : Security is OK
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 39 certs
Data exist, skip certificate repair...
Battery voltage is enough for start
Set phone to Normal mode...

AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:00:46
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - OK

Card found: 42455354
Registered to: NokiaUsers

Connect phone on selected interface...

Card found: 42455354
Registered to: NokiaUsers

Connect phone on selected interface...

Card found: 42455354
Registered to: NokiaUsers

Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : XGOLD 213
2nd boot OK, 01
2nd ready, AA
Sending Algo
Algo sent OK
BL : Quantum_Bootloader_2.3_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!
Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI   : 357008043381971
PCcode : 059G4F5

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\Users\AHMED\Desktop\Nokia Infinity Best v2.29 by NRSolution\Backup\Cert\357008043381971_2nd_XG213_CRT.rpl


Flashing done!
Total flash time : 00:00:00
Reboot phone now...

Reading Phone Info....
Connected phone -   C1-02
Software Info:     V 06.15 25-11-11 RM-643 (c) Nokia            
IMEI:  357008043381971
PPM version :   V 06.15 25-11-11 RM-643 (c) Nokia             M_C
Product code:  059C8L2
Checking...
SimLock status : SimLock is OK
Security status : Security is OK
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Checking User Certificates...
Total - 39 certs
Data exist, skip certificate repair...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:00:19
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - OK

Reading Phone Info....
Connected phone -    C1-02
Software ver : V 06.15 25-11-11 RM-643 (c) Nokia            
IMEI    :      357008043381971
PPM     :      V 06.15 25-11-11 RM-643 (c) Nokia             M_C
CNT     :      Content: m_c_059B4G6 V 06.15 25-11-11 RM-643 (c) Nokia            
Product SN   :     0E54B96AH
Product code :     0597647
Base Prd.code:     0591126
Module code  :     0204487
Long Prod.SN :     0
Hardware info=======
HWID  : 1000
Batery: 3799 mV
CMT BT: 19b5-22012
LCDVer: TPO
Lock info ===========
IMEI       : 357008043381971
IMEI spNet : 3A 75 00 08 34 83 91 07 
IMEI svNet : 33 75 00 08 34 83 91 27 F2 

Sl Conf  : 001-01-00000000000
Sl Prof  : 800000000003000-B
Sl Aux   : 000B0000
Hw Sig   : 347881C12FCB0822
Country      : Test SIM (Open)
Operator     : NOKIA (Open)

Lock info:
Block 1
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 2
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 3
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 4
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 5
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 6
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  
Block 7
L1:Open;  L2:Open;  L3:Open;  L4:Open;  L5:Open;  

CRT308 Backup Created

INFINEON : SuperDongle not exist (It is OK)
CMLA Key status : Not Present
SimLock status : OK
Security status : OK
PA_SL3 phone ,  SP_CODE_LEN : 15

User Code : 12345
MMC pwd  : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 

Done!

Resetting selected items...
Check phone mode...
Phone already in Test mode, skip change...
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!

Elapsed: 00:00:01

Set phone in Normal mode...
Restarting...

Done!
Connect phone on selected interface...


Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm643__04.40.mcusw
PPM : rm643__04.40.ppm_f
CNT : rm643__04.40.image_f_0597663
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : XGOLD 213
2nd boot OK, 01
2nd ready, AA
Sending Algo
Algo sent OK
BL : Quantum_Bootloader_2.3_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!
Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI   : 357008043381971
PCcode : 059G4F5

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\Users\AHMED\Desktop\Nokia Infinity Best v2.29 by NRSolution\Backup\Cert\357008043381971_2nd_XG213_CRT.rpl


   ===Flashing [MCU]===
File : rm643__04.40.mcusw
Image : rm643__04.40.mcusw_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00040000
Erasing, wait ... 
Erase done, time : 00:00:01 
Write , Start : 0x40040000 , Len : 0x00040000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40080000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40080000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 4/5
Erase , Start : 0x400A0000 , Len : 0x00100000
Erasing, wait ... 
Erase done, time : 00:00:05 
Write , Start : 0x400A0000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 5/5
Erase , Start : 0x40400000 , Len : 0x01800000
Erasing, wait ... 
Erase done, time : 00:02:11 
Write , Start : 0x40400000 , Len : 0x01780000
Flashing , wait ...
Region flash error
Looks like connection lost...
Error...
-> Check cable, flashfile, try again from this file

Connect phone on selected interface...


Elapsed: 00:09:31
Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm643__04.40.mcusw
PPM : rm643__04.40.ppm_f
CNT : rm643__04.40.image_f_0597663
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : XGOLD 213
2nd boot OK, 01
2nd ready, AA
Sending Algo
Algo sent OK
BL : Quantum_Bootloader_2.3_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!
Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI   : 357008043381971
PCcode : 059G4F5

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\Users\AHMED\Desktop\Nokia Infinity Best v2.29 by NRSolution\Backup\Cert\357008043381971_2nd_XG213_CRT.rpl


   ===Flashing [MCU]===
File : rm643__04.40.mcusw
Image : rm643__04.40.mcusw_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00040000
Erasing, wait ... 
Erase done, time : 00:00:01 
Write , Start : 0x40040000 , Len : 0x00040000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40080000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40080000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 4/5
Erase , Start : 0x400A0000 , Len : 0x00100000
Erasing, wait ... 
Erase done, time : 00:00:06 
Write , Start : 0x400A0000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 5/5
Erase , Start : 0x40400000 , Len : 0x01800000
Erasing, wait ... 
Erase done, time : 00:01:07 
Write , Start : 0x40400000 , Len : 0x01780000
Flashing , wait ...
Region flash done, time : 00:00:29

   ===Flashing [PPM]===
File : rm643__04.40.ppm_f
Image : package_f.ppm_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41C00000 , Len : 0x00600000
Erasing, wait ... 
Erase done, time : 00:00:17 
Write , Start : 0x41C00000 , Len : 0x003657C0
Flashing , wait ...
Region flash done, time : 00:00:04

   ===Flashing [CNT]===
File : rm643__04.40.image_f_0597663
Image : package_f_0597663.image.fls
Cert block found, sending....
Cert sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42200000 , Len : 0x01C60000
Erasing, wait ... 
Erase done, time : 00:03:28 
Write , Start : 0x42200000 , Len : 0x00B40000
Flashing , wait ...
Region flash done, time : 00:00:14
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ... 
Erase done, time : 00:00:05 
No write data, skip

Flashing done!
Total flash time : 00:08:20
Reboot phone now...

Reading Phone Info....
Connected phone -   C1-02
Software Info:     V 04.40 23-02-11 RM-643 (c) Nokia            
IMEI:  357008043381971
PPM version :   V 04.40 23-02-11 RM-643 (c) Nokia             F
Product code:  0597647
Checking...
SimLock status : SimLock is OK
Security status : Security is OK
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Checking User Certificates...
Total - 39 certs
Data exist, skip certificate repair...
Battery voltage is enough for start
Set phone to Normal mode...

AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:06:42
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - OK

Phone disconected!

Connect phone on selected interface...

